Construction Drawing Sheet Types: What the A, S, M, E and P Sheets Mean
Key points
- Under the US National CAD Standard, a sheet number combines a discipline letter, a sheet-type digit and a two-digit sequence number.
- A-101 reads as architectural, plan, first sheet, while S, M, E and P mark structural, mechanical, electrical and plumbing sheets.
- The digits 0 to 9 sort sheets into general, plans, elevations, sections, large-scale views, details, schedules, user-defined and 3D views.
- Small residential sets have fewer sheets and can combine drawing types on one sheet, while large commercial sets split disciplines with two-letter codes.
- UK projects under BS EN ISO 19650 use a longer hyphenated identifier, and some Australian owners set their own ISO 19650-based codes.
A full set of construction drawings can run from a dozen sheets to several hundred. The code in the corner of each sheet tells you which discipline drew it and what kind of drawing it is. Once you can decode it, you can go straight to the foundation plan or the window schedule instead of leafing through the whole set.
How a drawing set is organised
In the United States, the main published convention for organising sheets is the United States National CAD Standard (NCS), developed through a consensus process at the National Institute of Building Sciences (NIBS). Version 7 combines the AIA CAD Layer Guidelines, the Construction Specifications Institute's Uniform Drawing System (Modules 1 to 8) and NIBS's BIM implementation and plotting guidelines. Public owners build their own rules on it; the US Army Corps of Engineers' A/E/C Graphics Standard, for example, states that its intent is to embrace the NCS.
Sets run from the general to the specific. The cover sheet comes first; in the A/E/C standard it is always numbered G-001 and, on small projects, can carry the index of drawings. General notes, symbol legends and abbreviations follow, then each discipline's sheets in a standard order.
The discipline designators
The first letter of a sheet number names the discipline. The NCS Level 1 designators, in the order Archtoolbox gives for a set, are G General, H Hazardous materials, V Survey/mapping, B Geotechnical, C Civil, L Landscape, S Structural, A Architectural, I Interiors, Q Equipment, F Fire protection, P Plumbing, D Process, M Mechanical, E Electrical, W Distributed energy, T Telecommunications, R Resource, X Other disciplines, Z Contractor/shop drawings and O Operations. The University of Houston publishes the same list in its CAD requirements.
The order is not applied uniformly. Archtoolbox notes that architects disagree about whether structural sheets belong before or after architectural ones, so the drawing index is the guide to the order your set actually uses.
The A, S, M, E and P sheets
The University of Calgary's drawing standard, which adapts the NCS, gives a practical picture of what each discipline usually contains:
- A, architectural: floor and roof plans, reflected ceiling plans, building elevations, building and wall sections, enlarged plans of stairs and washrooms, finish plans, and door and window schedules.
- S, structural: general notes and typical details, foundation and framing plans, column and beam schedules, and structural sections and details.
- M, mechanical: ventilation, heating and cooling plans, schematics and riser diagrams, and mechanical schedules.
- E, electrical: lighting, power and communication system plans, panel schedules, and riser diagrams for systems such as fire alarms.
- P, plumbing: the NCS gives plumbing its own letter, but not every owner follows that split. Calgary's standard files drainage and plumbing plans under its mechanical (M) series.
Large projects can add a second letter to split a discipline further, such as MH for HVAC and MP for piping in the A/E/C standard, or AD for architectural demolition sheets in Calgary's. When only one letter is used, a hyphen fills the second position, which is why sheet numbers look like A-101.
How a sheet number is built
A sheet number has three parts: the discipline designator, a single sheet-type digit and a two-digit sequence number from 01 to 99. In A-101, A is architectural, 1 means plans and 01 is the first sheet in that series. A-204 would be the fourth architectural elevation sheet.
Sequence numbers do not have to be consecutive, so gaps can be left for sheets added later without renumbering the set. Some teams match the sequence number to the floor so that, for example, the second-floor plans share a number across disciplines; Calgary's standard shows this as A2-02, M2-02 and E2-02 in its own format.
The sheet-type digits, as listed in the University of Houston's sheet type designators, are:
| Digit | Sheet type | Example |
|---|---|---|
| 0 | General: symbols, legends, notes | A-001 |
| 1 | Plans (horizontal views) | A-101 |
| 2 | Elevations (vertical views) | A-201 |
| 3 | Sections | A-301 |
| 4 | Large-scale views | A-401 |
| 5 | Details | A-501 |
| 6 | Schedules and diagrams | A-601 |
| 7 and 8 | User defined | Varies |
| 9 | 3D representations | A-901 |
What each sheet type contains
General (0) sheets hold the information that applies across the set: general notes, symbol legends and abbreviations. Plans (1) are horizontal views, such as floor, roof and reflected ceiling plans. Elevations (2) are vertical views of the building's faces. Sections (3) cut vertically through the building or a wall to show how it is put together.
Large-scale views (4) enlarge crowded areas, such as stairs, washrooms and kitchens. Details (5) zoom in on specific junctions and components. Schedules and diagrams (6) are tables and schematics, such as door, window and electrical panel schedules and riser diagrams.
Callouts on the drawings tie these together. In the A/E/C standard, an elevation callout points to a type-2 sheet, a section to a type-3 sheet, an enlarged area to a type-4 sheet and a detail to a type-5 sheet. So the sheet reference inside a section bubble on a floor plan will look like A-301 or A-302.
Not every sheet type has to appear in every set. On small projects, Calgary's standard allows different drawing types to share a sheet, as long as the sheet title names all of them.
Residential sets versus commercial sets
A complex commercial job, such as a hospital, can run to hundreds of sheets. Large sets use two-letter designators to subdivide disciplines, for example separating electrical lighting sheets from electrical power sheets. Projects with several buildings can use the second letter to identify each building instead; Calgary's standard gives AA, AB and AC for buildings 1, 2 and 3.
A small residential project may have only a few dozen sheets, and Archtoolbox notes that lighting and power can then sit on the same or consecutive sheets. Expect single-letter designators, fewer sheet types and several drawing types combined on one sheet. If a set uses its own numbering, the drawing index on the cover sheet is the key to decoding it.
Whether a house needs separate structural, mechanical, electrical or plumbing drawings, and who must prepare or seal them, depends on local rules, so check with your local building department or a licensed professional.
How other countries name drawings
Canada. Some owners adapt the US system rather than adopting it unchanged. The University of Calgary's standard, adapted from NCS Version 6, keeps the discipline letters but gives the digits its own meanings, such as A0 for general information, A2 for floor and roof plans and A6 for building elevations. It also works in metric units, with floor plans at 1:100 or 1:50.
United Kingdom. Projects that work to BS EN ISO 19650 give each file, including each drawing, a hyphen-separated identifier. Guidance from the Centre for Digital Built Britain, which uses the UK National Annex as its worked example, sets out seven fields: project, originator, volume or system, level or location, type, discipline and number. Drawings take the type code DR, and the discipline is a single letter, such as A for architect, S for structural engineer, M for mechanical engineer and E for electrical engineer. Level codes start at 00 for the ground floor, so 01 is the first floor above it, whereas the US A/E/C standard calls the ground floor the first floor. A hypothetical ground-floor drawing by an architect might read PRJ01-ABC-ZZ-00-DR-A-0001. The exact codes are agreed for each project.
Australia. Some Australian owners publish their own codes based on ISO 19650. The University of Melbourne's 2024 BIM and CAD standards name drawing files with fields for project, originator, building, level, form, discipline and number, using DWG for a drawing and discipline letters such as A for architecture, S for structural engineering and W for water/hydraulic engineering.
Whatever the country, the drawing index and the project's own standards are the final word on what a code means.
Frequently asked questions
What does the sheet number A-101 mean?
Under the US National CAD Standard, A is the architectural discipline, 1 marks a plan sheet and 01 is the first sheet in that series. Standards such as the University of Calgary's arrange plans from the lowest level up, so the first plan sheet is often the lowest floor.
Why are some sheet numbers missing from my drawing set?
Sequence numbers do not have to run consecutively, so designers can leave gaps for sheets added later without renumbering the set. The drawing index on the cover sheet lists the sheets that were actually issued.
Do structural drawings come before architectural drawings?
The NCS discipline list places structural (S) ahead of architectural (A), but architects disagree on this and sets vary. Check the drawing index on the cover sheet for the order your set uses.
How are drawings numbered on UK projects?
Projects that follow BS EN ISO 19650 use a hyphen-separated identifier covering project, originator, volume or system, level, type, discipline and number. Drawings carry the type code DR and a single letter such as A or S identifies the discipline, with the exact codes agreed for each project.
Sources
- United States National CAD Standard (NCS) — National Institute of Building Sciences
- A/E/C Graphics Standard, Release 2.2 (ERDC/ITL SR-23-1) — US Army Engineer Research and Development Center, via WBDG
- Construction Document Sheet Numbers and Order — Archtoolbox
- CAD Standards, Appendix A: Discipline Designators — University of Houston
- CAD Standards, Appendix B: Sheet Type Designators — University of Houston
- Design Standards 8.1: Drawing Standard — University of Calgary
- National Annex Guidance (BIM Toolkit) — Centre for Digital Built Britain, University of Cambridge
- Digital Estate Management: BIM and CAD Standards (2024) — University of Melbourne
This article was researched from the sources listed above and drafted with AI assistance, then checked against those sources and approved by an editor before publication. It is general information, not professional advice for your project. Read our editorial policy, or tell us about an error.